USURPER V2 - COMPLETE BELT SET
>PROJECT KING SLAYER CONTINUES<
The evolution of overt load bearing belts continues with the second generation of the Usurper Belt System. Lessons learned from fielded V1s, user feedback and new patent pending innovations have come together to launch the V2 even further ahead of competitors, both on the market place and the battle field.
OUTER BELT FEATURES:
-One size fits all via our patent pending sleeve system
-Curved and structural profile for ergonomic load bearing
-Interchangeable MOLLE or canted sleeves
-Supports 2" and 2.25" Holster Adapters with included Shim Plug
-User configurable mounting hardware (G-Hooks come standard)
-Can be ran as our G-Hook mounting system or the traditional two part belt
-Light weight but durable construction
-Thermoplastic inner skeleton for structure and load bearing
INNER BELT FEATURES:
-Austri Alpin Inc. 1" D-Ring COBRA® ProStyle 18kN Buckle
-Exterior Soft Loop Attachment Surface
-Thermoplastic inner for holster support
-Interior 1/8" Close Cell Foam for Comfort
-Attachment Points on Both Sides for the G-Hook Configured Outer Belt
Please Note: Neither the Inner Belt nor Outer Belt are rated safety devices and should NOT be used for climbing, rappelling, helicopter retention, mounting flotation devices or as any other life saving device. Shaw Concepts LLC assumes no liability connected to the misuse of this product, loss, damage, or expenses of any kind arising out of the use or inability to use our product.
SIZING GUIDE: (PLEASE READ)
The Usurper Belt sizing is based on your measured waist at the belt loops wearing the uniform you plan to use the belt with. We recommend if you are between sizes to go UP a size. Please note belt length may be plus or minus an inch and buckle type will also affect sizing.
Small: 31 - 35"
Medium: 34 - 38"
Large: 37 - 41"
Extra Large: 40 - 44"
WEIGHT - Entire Kit:
Cobra Buckle: Small - 14.8 oz / Medium - 15 oz / Large - 15.2 oz / XL - 15.4 oz
Made in the USA / Berry Compliant
*Magazines, Gear and other accessories not included*
If you are ordering for a Unit, please contact [email protected]
Product Information
Product Information
Shipping & Returns
Shipping & Returns
USURPER V2 - COMPLETE BELT SET
USURPER V2 - COMPLETE BELT SET
>PROJECT KING SLAYER CONTINUES<
The evolution of overt load bearing belts continues with the second generation of the Usurper Belt System. Lessons learned from fielded V1s, user feedback and new patent pending innovations have come together to launch the V2 even further ahead of competitors, both on the market place and the battle field.
OUTER BELT FEATURES:
-One size fits all via our patent pending sleeve system
-Curved and structural profile for ergonomic load bearing
-Interchangeable MOLLE or canted sleeves
-Supports 2" and 2.25" Holster Adapters with included Shim Plug
-User configurable mounting hardware (G-Hooks come standard)
-Can be ran as our G-Hook mounting system or the traditional two part belt
-Light weight but durable construction
-Thermoplastic inner skeleton for structure and load bearing
INNER BELT FEATURES:
-Austri Alpin Inc. 1" D-Ring COBRA® ProStyle 18kN Buckle
-Exterior Soft Loop Attachment Surface
-Thermoplastic inner for holster support
-Interior 1/8" Close Cell Foam for Comfort
-Attachment Points on Both Sides for the G-Hook Configured Outer Belt
Please Note: Neither the Inner Belt nor Outer Belt are rated safety devices and should NOT be used for climbing, rappelling, helicopter retention, mounting flotation devices or as any other life saving device. Shaw Concepts LLC assumes no liability connected to the misuse of this product, loss, damage, or expenses of any kind arising out of the use or inability to use our product.
SIZING GUIDE: (PLEASE READ)
The Usurper Belt sizing is based on your measured waist at the belt loops wearing the uniform you plan to use the belt with. We recommend if you are between sizes to go UP a size. Please note belt length may be plus or minus an inch and buckle type will also affect sizing.
Small: 31 - 35"
Medium: 34 - 38"
Large: 37 - 41"
Extra Large: 40 - 44"
WEIGHT - Entire Kit:
Cobra Buckle: Small - 14.8 oz / Medium - 15 oz / Large - 15.2 oz / XL - 15.4 oz
Made in the USA / Berry Compliant
*Magazines, Gear and other accessories not included*
If you are ordering for a Unit, please contact [email protected]
Original: $280.00
-70%$280.00
$84.00Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
>PROJECT KING SLAYER CONTINUES<
The evolution of overt load bearing belts continues with the second generation of the Usurper Belt System. Lessons learned from fielded V1s, user feedback and new patent pending innovations have come together to launch the V2 even further ahead of competitors, both on the market place and the battle field.
OUTER BELT FEATURES:
-One size fits all via our patent pending sleeve system
-Curved and structural profile for ergonomic load bearing
-Interchangeable MOLLE or canted sleeves
-Supports 2" and 2.25" Holster Adapters with included Shim Plug
-User configurable mounting hardware (G-Hooks come standard)
-Can be ran as our G-Hook mounting system or the traditional two part belt
-Light weight but durable construction
-Thermoplastic inner skeleton for structure and load bearing
INNER BELT FEATURES:
-Austri Alpin Inc. 1" D-Ring COBRA® ProStyle 18kN Buckle
-Exterior Soft Loop Attachment Surface
-Thermoplastic inner for holster support
-Interior 1/8" Close Cell Foam for Comfort
-Attachment Points on Both Sides for the G-Hook Configured Outer Belt
Please Note: Neither the Inner Belt nor Outer Belt are rated safety devices and should NOT be used for climbing, rappelling, helicopter retention, mounting flotation devices or as any other life saving device. Shaw Concepts LLC assumes no liability connected to the misuse of this product, loss, damage, or expenses of any kind arising out of the use or inability to use our product.
SIZING GUIDE: (PLEASE READ)
The Usurper Belt sizing is based on your measured waist at the belt loops wearing the uniform you plan to use the belt with. We recommend if you are between sizes to go UP a size. Please note belt length may be plus or minus an inch and buckle type will also affect sizing.
Small: 31 - 35"
Medium: 34 - 38"
Large: 37 - 41"
Extra Large: 40 - 44"
WEIGHT - Entire Kit:
Cobra Buckle: Small - 14.8 oz / Medium - 15 oz / Large - 15.2 oz / XL - 15.4 oz
Made in the USA / Berry Compliant
*Magazines, Gear and other accessories not included*
If you are ordering for a Unit, please contact [email protected]
